It looks like nothing was found at this location. Maybe try one of the links below or a search?
It looks like nothing was found at this location. Maybe try one of the links below or a search?
Try looking in the monthly archives. 🙂
°F | °C |
-103 to 77 | -75 to 25 |
-58 to 77 | -50 to 25 |
-11 to 77 | -25 to 25 |
77 to 122 | 25 to 50 |
77 to 212 | 25 to 100 |
77 to 392 | 25 to 200 |
77 to 572 | 25 to 300 |
77 to 752 | 25 to 400 |
10 -6 /°F | 10 -6 /°C |
6.00 | 10.80 |
5.94 | 10.70 |
5.78 | 10.40 |
6.83 | 12.30 |
6.89 | 12.40 |
7.09 | 12.76 |
7.22 | 13.00 |
7.39 | 13.30 |
Carbon | 0.02% | Nickel | 80.00% |
Manganese | 0.50% | Molybdenum | 4.20% |
Silicon | 0.35% | Iron | Balance |
Electric Resistivity | |
ohm-cir mil/ft | 349 |
microhm-mm | 580 |
Temperature coefficient of electrical resistivity | |
per °F from 0/930° | >0.0006 |
    per °C from -17.8/499°C | 0.0011 |
Curie temperature | 860°F (460°C) |
Melting point | 2650°F (1454°C) |
Specific heatBtu/lb · °F | 0.118 |
kJ/kg · K | 0.494 |
Specific gravity | 8.74 |
Density — lb/in3 | 0.316 |
                kg/m3 | 8747 |
Thermal conductivity | |
Btu-in/ft2/hr/°F | 240 |
W/m· K | 34.6 |
Minimum Limits | ||||
Thickness inmm |
40 G | 200 G | 2000 G | |
0.0251 | 0.635 | 35,000 | 40,000 | 55,000 |
0.0141 | 0.356 | 55,000 | 65,000 | 95,000 |
0.0061 | 0.152 | 65,000 | 85,000 | 135,000 |
0.0022 | 0.051 | 70,000 | 90,000 | 220,000 |
1 Ring laminations 1 1/2″ (38.1 mm)
OD x 1″ (25.4 mm) ID specimens
2 Tape toroid specimen
Coercive force from H=1.0 Oe, Oersted 0.008 to 0.02
Hysteresis loss from H=1.0 Oe, erg/cm3 per cycle 18 to 24
Form | µ at B = 40 G | µ max | Ho from H=1 Oersted |
Bar, Wire | 50,000 | 200,000 | 0.02 max. |
DC hysteresis loss from
H = 1 Oe, erg/cm3 per cycle . . . 16
Induction, gauss . . . . . . . . . . . . 7,300
Residual Induction, gauss . . . . 3,500
(Split strip or split rod specimens)